Template:Infobox firearm cartridge/doc

Usage

Firearm cartridge infobox

.357 SIG
Comparison to other cartridges. .357 SIG third from left.
類型	Pistol
原產地	United States
生產歷史
研發者	SIGARMS/聯邦彈藥有限公司
研發日期	1994
基本規格
彈殼類型	Rimless, bottleneck
彈頭直徑	.355 in（9.0 mm）
彈頸直徑	.381 in（9.7 mm）
彈肩直徑	.424 in（10.8 mm）
殼底直徑	.424 in（10.8 mm）
底緣直徑	.424 in（10.8 mm）
底緣厚度	.055 in（1.4 mm）
彈殼長度	.865 in（22.0 mm）
全長	1.14 in（29 mm）
底火種類	Small pistol
Template:Infobox firearm cartridge/ballistics header Template:Infobox firearm cartridge/ballisticsTemplate:Infobox firearm cartridge/ballisticsTemplate:Infobox firearm cartridge/ballisticsTemplate:Infobox firearm cartridge/ballisticsTemplate:Infobox firearm cartridge/ballisticsTemplate:Infobox firearm cartridge/ballistics footer
測試槍管長度：4 in 來源：Steve's 357 SIG Ballistic Page

A firearm cartridge infobox may be used to summarize information about a particular 子彈 or 炮彈. The infobox should be added using the {{infobox firearm cartridge}} template, as shown below:

{{infobox firearm cartridge
|name= 
|image= 
|caption= 
|origin= 
|type= 
<!-- Service history -->
|service= 
|used_by=
|wars= 
<!-- 生產史 -->
|designer= 
|design_date=
|manufacturer=
|production_date=
|number= 
|variants= 
<!-- 數值 -->
|is_SI_specs=
|parent=
|case_type=
|bullet=
|bullet_ref=
|neck=
|neck_ref=
|shoulder=
|shoulder_ref=
|base=
|base_ref=
|rim_dia=
|rim_dia_ref=
|rim_thick=
|rim_thick_ref=
|case_length=
|case_length_ref=
|length=
|length_ref=
|case_capacity=
|case_capacity_ref=
|rifling=
|primer=
|max_pressure=
|max_pressure_ref=
|pressure_method=
|max_pressure2=
|max_pressure2_ref=
|pressure_method2=
|max_pressure3=
|max_pressure3_ref=
|pressure_method3=
|max_cup=
|max_cup_ref=
|filling=
|filling_weight=
|detonation=
|yield=
<!-- 彈道表現 -->
|is_SI_ballistics=
|bwunit=
|bw1=
|btype1=
|vel1=
|en1=
|bw2=
|btype2=
|vel2=
|en2=
|bw3=
|btype3=
|vel3=
|en3=
|bw4=
|btype4=
|vel4=
|en4=
|bw5=
|btype5=
|vel5=
|en5=
|test_barrel_length=
|balsrc= 
}}

Note: When using parameters, avoid the ambiguous abbreviation "N/A", and instead use "unknown" or "none". All subjective or qualitative judgements and numerical quantities or statistics must be cited to a reliable source (see WP:MILMOS#CITE). References for numerically converted parameters (e.g., |bullet=) can be appended using the corresponding ref parameter (e.g., para|bullet_ref). Sources for the ballistic performance table, and more general sources, can be included using the para|balsrc parameter.

General parameters:

• name – the formal name of the cartridge.
• image – optional – an image of the cartridge. The image must be given in the form [[Image:Example.jpg|300px]]; in particular, the thumb attribute must not be selected.
• caption – optional – the text to be placed below the image.
• origin – the country or place where the cartridgeoriginated or was first manufactured.
• type – the type of cartridge or its designed use (e.g. "Pistol", "Rifle", "Hunting", etc.).

Service history parameters:

• service – optional – the period (usually given in years) when the cartridge was in service.
• used_by – optional – the countries, armed forces, or other groups using the cartridge; this may be omitted for cartridges employed only in their country of origin.
• wars – optional – any wars during which the cartridge saw service.

Production history parameters:

• designer – optional – the person or group responsible for designing the cartridge.
• design_date – optional – the date (usually given as a year) when the cartridge was designed.
• manufacturer – optional – the manufacturer of the cartridge.
• production_date – optional – the period (usually given in years) when the cartridge was produced.
• number – optional – the number of cartridge of this type that were manufactured.
• variants – optional – any variant models of the cartridge.

Specification parameters:

• is_SI_specs – optional – "yes" if the specifications are entered in International System of Units|SI units; any other value causes it to be interpreted as English units.
• parent – optional – the cartridge that the cartridge was based on, if any.
• case_type – optional – the type of case used for the cartridge (e.g. rimmed, rimless, straight, bottlenecked, etc.).
• bullet – optional – the diameter of the bullet used in the cartridge, expressed in mm or in; only include the number, and not the units of measurement, and omit any commas.
• neck – optional – the neck diameter of the cartridge, expressed in mm or in; only include the number, and not the units of measurement, and omit any commas.
• shoulder – optional – the shoulder diameter of the cartridge, if any, expressed in mm or in; only include the number, and not the units of measurement, and omit any commas.
• base – optional – the base diameter of the cartridge, expressed in mm or in; only include the number, and not the units of measurement, and omit any commas.
• rim_dia – optional – the rim diamter of the cartridge, expressed in mm or in; only include the number, and not the units of measurement, and omit any commas.
• rim_thick – optional – the rim thickness of the cartridge, expressed in mm or in; only include the number, and not the units of measurement, and omit any commas.
• case_length – optional – the case length of the cartridge, expressed in mm or in; only include the number, and not the units of measurement, and omit any commas.
• length – optional – the overall length of the cartridge, expressed in mm or in; only include the number, and not the units of measurement, and omit any commas.
• case_capacity – optional – the volume of the casing, expressed in cm³ or Grain (measure); only include the number, and not the units of measurement, and omit any commas.
• rifling – optional – typical rifling to stabilize the bullet fired from the cartridge.
• primer – optional – the type of primer used in the cartridge (e.g. large pistol, small rifle, rimfire, etc.).
• max_pressure – optional – the maximum chamber pressure of the round, expressed in MPa or psi; only include the number, and not the units of measurement, and omit any commas.
• pressure_method – optional – the methodology used to measure pressure, such as SAAMI, CIP, EPVAT, SCATP.
• max_pressure2 – optional as above, second pressure with method
• pressure_method2 – optional as above, second pressure's method
• max_pressure3 – optional as above, third pressure with method
• pressure_method2 – optional as above, third pressure's method
• max_cup – optional – the maximum chamber pressure of the round, expressed in Copper units of pressure; only include the number, and not the units of measurement, and omit any commas. Note that this parameter is not affected by the is_SI_specs parameter.
• filling – optional – the explosive filling material of the shell, if any.
• filling_weight – optional – the weight of the explosive material of the shell, if any.
• detonation – optional – for explosive shells, the detonation trigger type (e.g. "timer", "pressure", "motion sensor").
• yield – optional – for explosive shells, the yield (in tons of trinitrotoluene) of the device.

Ballistic performance parameters:

Ballistic data for up to five different weight bullets can be specified; it may be provided in either SI or English units, but this choice must be consistent for all five sets. The x in the field name should be replaced with 1–5 as displayed in the template format shown above (e.g. bw1, bw2, btype1, btype2, vel1, vel2, en1, en2, etc.):

• is_SI_ballistics – optional – "yes" if the energy and velocity ballistics data is entered in SI units; any other value causes it to be interpreted as English units.
• bwunit – optional – "gram" if the weights are given in grams; any other value causes them to be interpreted as grains.
• bwround – optional – specify the number of digits after the decimal point in the converted weight (the default is 0).
• bwx – optional – the weight of the bullet for given data, expressed in grams or Grain (mass); only include the number, and not the units of measurement.
  • btypex – optional – the type of bullet (e.g. JHP, FMJ, BHP, etc.).
  • velx – required if bw field is specified – velocity of the bullet at the muzzle, expressed in m/s or ft/s; only include the number, and not the units of measurement, and omit any commas.
  • enx – required if bw field is specified – energy of the bullet at the muzzle, expressed in J or ft·lbf; only include the number, and not the units of measurement, and omit any commas.
• test_barrel_length – optional – the length of the barrel used when generating the ballistics data.
• balsrc – optional – the source from which the ballistics data was obtained.

Microformat

Template:UF-hprodFirearm Cartridge